Contact | Advertising | Register | Login

Polymer Prices

04.12.2018

Base Petrochemicals, Aromatics and Feedstocks: November / December 2018

02.11.2018

Base Petrochemicals, Aromatics and Feedstocks: October / November 2018

02.10.2018

Base Petrochemicals, Aromatics and Feedstocks: September / October 2018

04.09.2018

Base Petrochemicals, Aromatics and Feedstocks: August / September 2018

02.08.2018

Base Petrochemicals, Aromatics and Feedstocks: July / August 2018

Engineering Thermoplastics

06.12.2018

Engineering Thermoplastics November 2018: Falling automotive demand leads to price erosion / Tight supply stabilises PA 6.6, PBT and POM / Downtrend could gain momentum in December

06.11.2018

Engineering Thermoplastics October 2018: Automotive slump puts pressure on the market / Prices of many materials down / Only PA 6.6 climbs again / Downtrend to continue in November

04.10.2018

Engineering Thermoplastics September 2018: Upturn largely comes to standstill / Weakness of auto industry clouds producers' prospects / Easing of tension with PMMA / Situation with PA 6.6 and PBT still tense

06.09.2018

Engineering Thermoplastics August 2018: PA 6.6 situation continues to be very tense / Notations nevertheless largely stable in the holiday month / Stimulus for further price rises will remain effective into autumn

06.08.2018

Engineering Thermoplastics July 2018: Next explosion of PA 6.6 prices / Otherwise mostly stable conditions / Demand noticeably shrinks / Minor movements expected in August

14.12.2018

Polyurethane Feedstocks December 2018: Isocyanates price slide halted / Weak demand across the board / Downwards into January / Polyols under pressure

23.11.2018

Polyurethane feedstocks November 2018: Polymeric MDI and TDI collapse / Long supply and weak demand / More rebates in December likely / Polyols mostly stable

24.10.2018

Polyurethane Feedstocks October 2018: Isocyanate downswing accelerates / Slacker demand from automotive and construction / More room at the bottom?

21.09.2018

Polyurethane Feedstocks September 2018: Further sharp drops for crude MDI and TDI / Demand lagging behind expectations / Marked volatility for TDI in October / MDI grades set to calm down

24.08.2018

Polyurethane Feedstocks August 2018: TDI trips over persistently higher MDI / Demand visibly weak / Polyols mostly unchanged / TDI and polymeric MDI stall

21.11.2018

Engineering Recyclate November 2018: Weak demand from automotive industry erodes prices for rABS, rPC and rPP compounds / Primary market fuels strong rPA 6.6 increase / Demand remains below expectations

20.11.2018

Standard Recyclate November 2018: Most recyclate prices soften slightly after decline of virgin material notations / Recycled LDPE stable / Only clear rPET grades firm slightly / Increasing pressure expected

19.10.2018

Engineering Recyclate October 2018: Rollovers dominate / Production largely running normally / Demand weakens / More movement expected next month

18.10.2018

Standard Recyclate October 2018: Largely stable market / Clear hikes only with clear rPET / Pressure on opaque grades of rLDPE / Seasonal lively demand / Fall in demand expected in November

21.09.2018

Engineering Recyclate September 2018: General rollover in September / Upcoming hikes for polyamides set to also push up recyclates / Strong production month expected

20.09.2018

Standard Recyclate September 2018: Mixed trends / Slight oversupply exerts pressure on rPP homo and rLDPE prices / Significant hikes on clear rPET / Upward potential for a few polymers in October

Standard Thermoplastics

14.12.2018

Standard Thermoplastics Trend December 2018: Hefty price cuts with all polymers after triple-digit fall in olefin and SM reference prices / Producers nevertheless improve margins

05.12.2018

Polyethylene November 2018: Falling ethylene reference sets trend / Most notations show moderate decline / Following ethylene crash, December should see substantial price cuts

05.12.2018

Polypropylene November 2018: Production outages trigger rollover / C3 fall factored in for homo injection moulding / Prices will sink noticeably in December

05.12.2018

Styrenics November 2018: Large discounts after SM reference nosedives / Cost reduction only partly transferred for PS and EPS / Occasional bottlenecks / Slump will continue in December

04.12.2018

PET November 2018: Downward thrust in notations gaining pace / Asian imports flowing back onto the market / Further corrections of the exceptional highs expected in December

04.12.2018

PVC November 2018: Prices roll over or slightly fall / C2 reduction cannot be factored in across the market / Availability still limited / Large cut in the ethylene reference for December leads to expectations of price cuts

07.12.2018

Composites/GRP November 2018: Resins slip / More downward momentum likely / Demand from all but automotive holds up / Glass fibre unchanged

07.11.2018

Composites/GRP October 2018: Rollover for ortho resins / Minor changes on the fringes / Lower prices certain in November / Glass fibre market quiet

08.10.2018

Composites/GRP September 2018: Ortho resins following styrene upswing / Downward movement expected again in October / Demand increasing only sluggishly / Glass fibre products unchanged

07.09.2018

Composites/GRP August 2018: Ortho resins dip slightly / Glass fibre reinforcement unchanged / Strengthening demand will push resins higher in September

07.08.2018

Composites/GRP July 2018: Ortho resins gain slight momentum / Costs passed on / Glass fibre products unchanged / Summer holidays dampen demand

14.12.2018

China Engineering Thermoplastics November 2018: Feedstocks and polymers head downwards / Impacts from falling crude oil prices / Low demand across the board / Downtrends projected for ABS, PA 6.6 and PMMA in December

13.12.2018

North America November 2018: PE weakens / PP falls sharply / PS and PVC stagnating / Engineering plastics prices erode / Only PA 6.6 still in short supply / Further reductions in December

12.12.2018

China Standard Thermoplastics November 2018: Prices of most types nosedive / SM notations hit record low for the year / Impacts from global market unease and weak oil prices / Mostly low demand projected for December

11.12.2018

Russia November 2018: Market shifts down a gear / Demand significantly more subdued

15.11.2018

Russia October 2018: Prices stagnate for most standard thermoplastics / PS trends upward / PET slumps with declining demand

13.11.2018

China Engineering Thermoplastics October 2018: SM and PX costs fall / Overall low demand / National Day Golden Week holiday in first week / Prices for all grades decrease / Negative market outlook

© 2001-2018 Plasteurope.com | Imprint | Privacy

Plasteurope.com is a business information platform for the European plastics industry. It is part of KI Kunststoff Information and PIE Plastics Information Europe, one of the leading content providers for the European plastics industry. We offer daily updated business news and reports, in-depth market analysis, polymer prices and other services for the international plastics industry, including a suppliers guide, career opportunities, a trade name directory and videos.

News | Polymer Prices | Material Databases | Plastics Exchange | Suppliers Guide | Jobs | Trade Names | Videos | Associations & Institutions | Register | Advertising

PIE – Plastics Information Europe | KI – Kunststoff Information | KunststoffWeb | Plastics Material Exchange | Polyglobe | K-Profi

© 2001-2018 by Plasteurope.com, Bad Homburg
Date of print: 15.12.2018 08:06:46 (Ref: 594653707)
Text and images are subject to copyright and other laws for protection of intellectual property.
Any duplication or distribution in any media as a whole or in parts requires prior written approval by Plasteurope. URL: http://www.plasteurope.com/prices/Default.asp